Twin Screw Air Compressor​

The JX-40APMX runs at the exhaust pressure of 0.8MPa and the exhausting volume is 5.2 m3/min allowing sufficient amounts of compressed air for substantial uses. It is connected with a direct connection drive mode and it is equipped with the variable frequency start system to provide the highest coefficient at the stage of start. It is air-cooled and can be used under conditions of up to 46 °C temperature. The motor utilized in the flow is 40 HP (30 kW); 3,000 RPM, and the electrical supply is the three-phase 380V/50Hz. This unit measures 1250 mm X 950 mm X 1290 and also has a net weight of 360 kg.

• Twin Screw Compression Technology: Aids in smooth operation enhanced by its high-efficiency performance, thereby suitable for industrial purposes with high pressures.
• Low Noise Operation: There is control of noise at or below 65 dB(A) thus minimal interruption during working activities.
• Air-Cooled System: Except for cooling, other features can help to adjust the operating temperature of all the components including in the high-temperature range up to 46°C.
• Direct Drive Mode: Less power is wasted while increasing efficiency and performance as the motor is directly coupled to the compressor unit.
• Variable Frequency Start: Exhibits the easiest and most efficient starting-up process thus the burden is reduced on the compressor parts.

• Compressor Unit: For air compression and its operations at great efficiency it has incorporated twin screw technology for its operations.
• Air-Cooled System: Cools the unit during its operation these features help to reduce the incidence of cases where the unit gets overheated thereby causing much harm to it.
• Lubrication System: Demands 20 liters of 46# grade lubricant to enable it to run more freely to cut down on wear and tear on moving parts.
• Motor: This compressor is powered by a thirty kW 40HP motor hence the force required in the constant and continuous supply of air in large volumes.

• Regular Maintenance: In order to get a higher useful and efficient life for the compressor, the lubricant level and various general parameters of the system should be monitored periodically.
• Proper Ventilation: It is advisable to use the compressor in a well-ventilated area especially to ensure that it continues to cool and not overheat.
• Noise Management: Even though the compressor is very quiet or makes little noise, ensure that your ears are protected in case you are very close to it for a long time.

We have conducted in-depth market research and longtime communication with our loyal customers, In order to solve the urgent needs of automobile manufacturing, textile, food processing and other industries for efficient, reliable and environmentally friendly compressed air systems, and we have analyzed the problems of the traditional fixed-speed air compressors (e.g., low energy-efficiency, high energy consumption, high noise, etc.), and the traditional compressors have been gradually failing to adapt to and satisfy the requirements of the modern industry, and we have combined with the most advanced PM VSD  technology with the best materials to develop this new permanent magnet frequency conversion air compressor. During the research and development period, we pay special attention to the improvement of energy efficiency ratio, the reduction of operating costs, environmental protection, and intelligence.

We have a R&D team consisting of experienced engineers and technical experts, using computer-aided design and simulation software to design and simulate the structure and working principle of the air compressor and test it, manufacturing prototypes according to the design drawings, equipped with advanced testing equipment and laboratories, and carrying out comprehensive performance testing and optimization in the laboratory and in the actual application scenarios, with every step strictly in accordance with the international standards, to ensure that each product meets the high standards of industrial applications, and further adjust the product design in customer use. Through continuous technological innovation and strict quality control, our high-quality, high-performance air compressor products have been successfully applied in many industries.